Garage Door Spring Broke?
We Fix It Today.

Torsion spring replacement runs $265–$365 for a standard residential double door in Saginaw. Extension spring pairs typically run $190–$300. High-cycle upgrades add $40–$80 but last 2.5× longer — worth it on heavy insulated doors or high-use garages. We quote exact price on the phone and in writing before we start.

Torsion springs mount horizontally above the door on a steel shaft and store energy by twisting. They are the most common type on newer Saginaw homes and on any double-car door. Extension springs run along the horizontal tracks on each side of the door and stretch to store energy. They are common on older single-car doors, especially on pre-1985 Saginaw homes. Torsion systems are generally smoother and longer-lasting, and extension systems need safety cables. We handle both.

No, and this is worth being direct about. A torsion spring stores enough energy to lift the full weight of the door, and when it breaks, the opener is left lifting the full dead weight of the door each time it runs. That can strip gears or burn out the motor quickly. Pull the red emergency release cord to disconnect the opener, and don’t try to lift the door by hand. Call us for same-day service.

We typically arrive the same day. Calls that come in before noon have the best chance of a same-day visit, and we do the same for Saginaw, Saginaw Township, Carrollton, Thomas Township, Bay City and Midland. When you call, we’ll give you an arrival window, and we’ll text you before we arrive so you’re not stuck waiting.

Both. If one spring broke, the other is at the same point in its life and is likely to fail soon after. Replacing only one can mean a second service call at full price. We replace both and include it in the quote, so there’s no upsell. It’s just good practice.

For most Saginaw homes, yes. Standard springs are rated for about 10,000 cycles. High-cycle springs are rated up to 25,000. For $40–$80 more up front, you may avoid paying a repeat $265–$365 repair in a few years. On a heavier insulated steel door or a high-use two-car garage, it’s a clear win. We’ll tell you honestly if your door and how often you use it justify the upgrade. For typical costs on every repair, visit our pricing page.

We strongly advise against it. Torsion spring winding takes specialized winding bars, exact knowledge of the spring’s size and turns, and experience. A mistake during winding can release a large amount of stored energy in an instant, and spring work is a common source of serious garage door injuries. A trained tech does this repair in 45–60 minutes for $265–$365. It’s not worth the risk.

Most standard torsion spring replacements take 45–60 minutes. Extension springs are typically faster — 30–45 minutes. We carry the most common Saginaw spring gauges in the truck, so we’re rarely waiting on parts. After the repair we run 3 full open-close cycles and lubricate all moving parts before we leave.

Steel contracts in cold. A torsion spring holds several hundred pounds of stored tension — and when the temperature drops to 16–23°F (Saginaw’s Jan–Feb range), that tension shifts. Springs near the end of their lifecycle have microscopic fatigue cracks that the cold then splits. Saginaw also sees 40–60 freeze-thaw cycles per winter, each one stressing the metal further. If your springs are 7+ years old, an October inspection catches this before a January emergency.

Yes, always. We diagnose the problem, explain the fix, and put the exact price in writing before we touch anything. If scope changes mid-job, we stop, explain, and wait for your approval. Nobody gets a surprise invoice from us.